Spa Cover Lifts

Cover Valet

This low profile spa cover lift works where others can't, inside a gazebo, up against a wall, even inside a spa room or greenhouse! The high quality, locking pneumatic pistons assist you to make lifting your spa cover a breeze!

Cover Rock-It

The Cover Rock-It gets the job done when moving your spa cover off and on your spa. Installs easily in minutes, it fits spas up to 96" and saves on your spa cover's wear and tear.

the Cover Caddy

Easy to Install and Use. The Cover Caddy attaches to the side of your portable spa. Once installed, you can remove your cover with ease. The Gas Strut does all the lifting and lowering for you! The Cover Caddy has a one year limited warranty.

Please note, the maximum thickness of spa cover accomoded with this lifter is a 5" to 3" taper.

Cover Up

Engineered for either spa side or deck mount, the advanced-design Cover Up utilizes "forward fulcrum theory" to assist lift and maintain a safe, low arc of cover travel. This advanced design, along with exacting tolerances, allows for ease of installation on the widest variety of spas.

the Cover Keeper

The Cover Keeper provides a simple solution to spa cover storage. Simply fold the cover in half and then flip it out of the way onto the storage brackets. A buckle strap keeps it securely in place while the spa cover itself adds extra privacy while you relax.

the Cover Shelf

So simple to use, the Covershelf is made of strong weather resistant plastic and steel to provide years of trouble free performance. The Covershelf simply swings open, and your cover is slid off the spa onto it.

Through a unique combination of balance and leverage, the Covermate I makes removing the spa cover virtually effortless, even without gas shocks. When in the open position the Covermate I stores the cover behind the spa (only 9" clearance needed). This creates an excellent wind & privacy screen for the spa users. Please note, spas with cut or radius corners over 10" and up to 20" require the extended brackets.

This is one of the best spa cover lifters that we have ever seen. It's weather resistance and ease of use will provide years of trouble-free performance.  With its design and positioning on the spa, the Covermate II requires less effort to remove the spa cover than other cover lifts of its kind.

Covermate III

Requiring only 6" of rear clearance the Covermate3 is made of powder coated aluminum and can be mounted directly to the side of the spa cabinet, or to the top of a deck.

Cover Mate Easy

Made of black powder coated aluminum with screw caps, bolt covers and rubber grips, the CoverMate Easy truly looks good! With no moving parts and a UV-resistant nylon catch strap, the Cover Mate Easy is trouble free. Because the Cover Mate Easy is made of larger-size tubing than look-alikes, twisting and torquing when removing the cover is virtually eliminated.

Covermate Freestyle

The design of the Cover mate Free Style is especially suited for round, octagon and other non-rectangular spas. The Cover Mate FreeStyle places the spa cover in an upright position, and requires as little as 12" of clearance behind the spa.

the Ideal E-Z Lifter

The E-Z Ideal Lifter adjusts to fit any cover up to 96" wide and aids in lifting your cover off the spa and storing it alongside in as little as 18" of clearance. It's anodized aluminum finish will keep it looking new for years to come. Round, oval or uncommonly shaped spas will require universal mounting kit.

Superlift 2

The Super Lift 2 adjusts to fit any cover up to 99". It's tension springs assist lifting your cover not only off, but back on your spa as well. The cover is then stored alongside in as little as 15" of clearance. Made of powder coated light weight steel tubing, it comes to you 90% pre-assembled. Please note this cover lift will only work on spas that are at least 27" high.

the Ideal Lift

The Ideal Cover Lift adjusts to fit any cover up to 98". It's designed to lift your cover and store it on the edge of your spa, and works great in gazebos or where you'd like your cover to block your neighbors view. Made of powder coated light weight steel tubing, it comes to you 90% pre-assembled and requires only 5" of space between your spa and a wall to operate. Covers with rounded corners require the "radius bracket".