EXTREME STRETCH Insulating Covers

Step 1. From the picture below choose the shape of your cover.

Shape: - - select - - Rectangle Four Cut Corners Two Cut Corners A Two Cut Corners B One Cut Corner A One Cut Corner B

	Click on the shape of your cover for detailed measuring instructions

Step 2. Fill in the measurements X and Y, in inches, that corresponds to that shape. Please use only whole inches. Covers with measurements 96" or less are $409.95 including delivery. If over 96" please call for pricing.

Step 3. Choose the shape of your cover's corners.

Corner Shape: - select - - n/a - Square Cut Corner Rounded Corner

Step 4. Fill in the dimension Z of the radius, OR the length of the cut corner in inches, as pictured, above ( hint: if the number you give is larger than the correct dimension the cover may not properly fit. If in doubt make the radius or cut corner a little smaller and the cover should fit ok ). If the corners of your cover are square please enter 0 (zero).

Z:

Step 5.. From the picture below, covers generally have a "skirt" of fabric hanging down the side to cover and protect the edge of your spa (some spas that are flush to a deck may require no skirt, if so choose none), please select that measurement below.

Skirt Length: none 1 inch 1 1/2 inch 2 inch 2 1/2 inch 3 inch 3.5 inch 4 inch 4.5 inch 5 inch 5.5 inch 6 inch

Step 6. These covers come standard with 4 latching straps that are 8" long (see picture below). If you prefer, you may enter your choice for a different length. Additional straps, and the precise location is also possible, but requires ordering by phone.

Strap Length:

Step 7. From the picture below choose the desired location of your latching straps.

Strap Location: a b c d

Step 8. From the picture below choose a color (please note, actual colors may vary slightly from how they appear on your computer).

Color: Brown Rust Wine Dark Blue Light Blue Light Gray Dark Gray Dark Green Tan Black

Step 9. Please list any special instructions

Special Instructions:

Step 10. Please double and triple check your measurements. If in doubt please don't hesitate to call us. Once again, we can not be responsible for miss-measured covers. By completing the check out procedure you are committing to purchasing this cover exactly as you have specified. Covers are put into production almost immediately and any changes you request after placing your order will be subject to an additional $50.00 charge. Click the button below, and you're done.

$409.95

After clicking the button above, return to this page and scroll down past this
point to add any of the Special Offers or Upgrades and Options that you'd like.