hot tub and spa message board
| |
Re: Sundance FLO error - 2000 Altamar
Posted By: MikeZ In Response To: Re: Sundance FLO error - 2000 Altamar (brad)
Date: Wednesday, 28 June 2006, at 6:22 a.m.
I think everything is working now. I FINALLY got ahold of someone who would help me at the dealer (they seem very excited about scheduleing visits, but helping over the phone is just not thier thing). I found out what and where the flow switch is located and unhooked the wires from it. As soon as i did this the FLO message went away and every thing was operational. i then removed the flow switch and cleaned it off becuase i had a 'dusty film' on the metal tab. i then reinserted it and hooked the wires back up. the message reappeared. soooo i then turned the switch about 90 degrees in it's threads. the FLO message went away. i then turned it back so that the arrow on switch pointed in the water flow direction and everything is still working throughout the night and today (Huraaaaaahhhhhh....knock on all the wood i can find). i even fiddled with lowering the temp over night because that brought the FLO message everytime prior to fiddling with the flow switch. the temp of the tub lowered without any messages or issues. I don't know how the flow switch works, but after i cleaned it and swivled it in its threads a bit, the messages is gone. Can anyone explain this. could it really be fixed or have I just bought myself time before i have to buy a new switch?
I'm a little gun shy on celebrating at this point.
| |
Hot Tub and Spa Cover message Board is maintained by Spa Cover administrator with WebBoard 5.12.
Roll Covers |
Insulating Spa Covers |
Aluminum Hot Tub Covers |
Soft-Top
Floating Spa Blankets |
Spa Cover Lifters |
Spa Covers Accessories
How to Measure for a New Spa Cover |
Cover & Spa Care Info |
Spa Cover Store
FAQ |
About/Contact |
Privacy Policy
Hot Tub & Spa Covers
Abracadabra Hot Tub & Spa Covers
A division of Roberts Hot Tubs
2343 Welcome Ave.
Richmond, CA 94804
(510) 234-7920