hot tub and spa covers
hot tub and spa message board

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Re: Sundance FLO error - 2000 Altamar

Posted By: brad
Date: Monday, 26 June 2006, at 3:00 p.m.

In Response To: Re: Sundance FLO error - 2000 Altamar (n1oty)

Ok I'll give that a try. I do have great jet action, everything operates the way it should. When you say make sure they are in the two middle holes, do you mean the top and bottom, because my red wire is actually wire nutted together with another one. If you can tell me where the black wire should be, top or bottom and how many over from the left or right, and the same for the red wire, I would be 100% sure I have them in the right spot and seated well, too. Thanks for the jumper tip, I'll try that tomorrow and see what happens. If you are able to help me out on the specific location of that wires, I'd REALLY appreciate it, I think I have them right but I'm not totally sure. John, thanks again for helping me out, with you help I think I can get it running right again! Brad

: Just make sure the black and red flow switch
: wires are in the two middle holes and fully
: seated. I would not obsess over not feeling
: suction through the footwell suctions. They
: only feed the main pumps. If you have good
: jet action, they are OK. The circ pump draws
: water through the filter. It sounds like
: you've found the circ pump to be OK and the
: flow switch closing as it should. In order
: to troubleshoot the board, you could remove
: the flow switch wires from the connector,
: put the connector with the sensor wires back
: on the board, power up the spa, take a small
: thin jumper wire and jumper across the two
: flow switch connection points AFTER the circ
: pump is moving water. If you still have a
: FLO error code with the jumper in place,
: your board is bad.

: John

Messages In This Thread

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Hot Tub and Spa Cover message Board is maintained by Spa Cover administrator with WebBoard 5.12.

Roll Covers | Insulating Spa Covers | Aluminum Hot Tub Covers | Soft-Top
Floating Spa Blankets | Spa Cover Lifters | Spa Covers Accessories
How to Measure for a New Spa Cover | Cover & Spa Care Info | Spa Cover Store
FAQ | About/Contact | Privacy Policy

spa covers
Hot Tub & Spa Covers
Abracadabra Hot Tub & Spa Covers
A division of Roberts Hot Tubs
2343 Welcome Ave.
Richmond, CA 94804
(510) 234-7920