hot tub and spa message board
| |
Re: Sundance FLO error - 2000 Altamar
Posted By: brad In Response To: Re: Sundance FLO error - 2000 Altamar (n1oty)
Date: Monday, 26 June 2006, at 1:58 p.m.
Well I was hoping to avoid the spa repairman but it's not looking good. I replaced the flow switch, they were identical #'s and I still have the FLO error. I tried shutting off power @ breaker, tried putting old one in and new one out of tub and running to manually move flapper, I'm 99% sure I have the wires on the new one in the holes of the plug where the old one was, still getting FLO error. I know I have flow, I've disconnected lines while only the recirc pump running-water BLOWS out the lines, I can see the flapper moving, I have just cleaned the cartridge, its super clean, ran it w/ out cartridge. The only thing I'm kid of curious is that the three intake screens on the bottom, while running I dont feel any suction there, as if there is some kind of obstruction, as I know I had a little suction there. I've disconnected the plugs on each pump, let a little water out, and I'm almost at the end where I can't do too much more. Anyone in addition to JOHN willing to help me out or point me in the right direction I'd really appreciate it. IF someone with a 2000 SUndance alatamar might be able to look at their wiring of the flow switch, so I can be 110% sure I have the wires in the right spot on the plug, I'd appreciate that too. THanks in advance. Brad
| |
Hot Tub and Spa Cover message Board is maintained by Spa Cover administrator with WebBoard 5.12.
Roll Covers |
Insulating Spa Covers |
Aluminum Hot Tub Covers |
Soft-Top
Floating Spa Blankets |
Spa Cover Lifters |
Spa Covers Accessories
How to Measure for a New Spa Cover |
Cover & Spa Care Info |
Spa Cover Store
FAQ |
About/Contact |
Privacy Policy
Hot Tub & Spa Covers
Abracadabra Hot Tub & Spa Covers
A division of Roberts Hot Tubs
2343 Welcome Ave.
Richmond, CA 94804
(510) 234-7920