
| |
Re: 5-yr old softub 220 inop--power light flashes
Posted By: AJJ In Response To: Re: 5-yr old softub 220 inop--power light flashes (AJJ)
Date: Sunday, 21 May 2006, at 12:07 p.m.
: Got it. Thanks. The temp sensor plug was not
: making good contact with the pins on the
: board. The overtemp relay was basically
: stuck open. I cleaned up the pins and plug
: for the temp sensor and all is well now.Back to square one: The pump ran fine for the first day on the newly filled tub. Sometime overnite, the unit failed again. Same symptom as before; power light flashes but reset button does nothing. I have confirmed the Therm relay is energized closed as it should be, but the Hi Limit (H/L) relay is remaining open. No visible corrosion on the PCB. Any ideas? Thanks.
| |
Hot Tub and Spa Cover message Board is maintained by Spa Cover administrator with WebBoard 5.12.
Roll Covers |
Insulating Spa Covers |
Aluminum Hot Tub Covers |
Soft-Top
Floating Spa Blankets |
Spa Cover Lifters |
Spa Covers Accessories
How to Measure for a New Spa Cover |
Cover & Spa Care Info |
Spa Cover Store
FAQ |
About/Contact |
Privacy Policy

Hot Tub & Spa Covers
Abracadabra Hot Tub & Spa Covers
A division of Roberts Hot Tubs
2343 Welcome Ave.
Richmond, CA 94804
(510) 234-7920