hot tub and spa message board

Re: old spa part needed

Posted By: George A. Bisson
Date: Saturday, 20 May 2006, at 11:45 a.m.

In Response To: old spa part needed (rbunc)

: I have a very old (20 yrs or so) spa--Seven
: Seas by Pacific, "Baltic" model.
: I'm missing the air control cap, the part
: that screws onto the air intake to control
: the air bubble flow. I have been unable to
: locate a replacement despite a lot of
: searching on the internet. Does anyone know
: a good source for old spa parts?

: Worst case, I assume I'll need to replace the
: entire air valve assembly. However, this
: appears to be very difficult as I have to
: cut away the insulating foam and work in the
: very limited space between the tub wall and
: the pump housing.

: Can anyone offer any tips/advice? Thanks in
: advance!
try a i inch flat washer to control the air flow

Messages In This Thread

• old spa part needed
  rbunc -- Wednesday, 17 May 2006, at 12:30 p.m.
  • Re: old spa part needed
    George A. Bisson -- Saturday, 20 May 2006, at 11:45 a.m.

Hot Tub and Spa Cover message Board is maintained by Spa Cover administrator with WebBoard 5.12.