hot tub and spa message board

Re: Blue Ridge Spas

Posted By: Andrew
Date: Thursday, 11 May 2006, at 6:12 p.m.

In Response To: Re: Blue Ridge Spas (JohnS)

: The jets are probably just shut off. Try
: turning the outer housing in the water. It
: may take some elbow grease. I had sand
: collected in one of mine and had to use a
: wrench to free it up.

: There should be a tab on the inside of the
: housing between the jet and the jet wall.
: You can lift the tab up and pull out the
: entire housing to clean them. Again, if
: there is sand buildup, it'll be a pain to
: get out.

: John
I didn't know you could shut off individual jets. The spa came with the house so I don't have have any manual or anything. They were all working fine it just happened and it's like random jets. I do have 2 knobs up top like the other guy said but they just slow the flow of the jets and it doesn't effect the jets that aren't working. I'll try what you said. Thanks

Messages In This Thread

• Blue Ridge Spas
  Andrew -- Wednesday, 10 May 2006, at 10:20 a.m.
  • Re: Blue Ridge Spas
    JohnS -- Wednesday, 10 May 2006, at 11:58 a.m.
    • also
      tasker109 -- Wednesday, 10 May 2006, at 3:48 p.m.
    • Re: Blue Ridge Spas
      Andrew -- Thursday, 11 May 2006, at 6:12 p.m.
    • Re: Blue Ridge Spas
      Andrew -- Friday, 12 May 2006, at 5:32 p.m.
  • Re: Blue Ridge Spas
    mel -- Sunday, 16 March 2008, at 10:17 a.m.
    • Re: Blue Ridge Spas
      Dave McClure -- Tuesday, 4 November 2008, at 7:38 p.m.

Hot Tub and Spa Cover message Board is maintained by Spa Cover administrator with WebBoard 5.12.