Hurricane Tie-Down Strap
Each year, thousands of spa covers are blown off spas and destroyed or damaged by high winds and stormy weather.
If the possibility of this problem exists where you live, here's the answer. These 1�" wide black nylon straps are
super-strong, and offer an extra level of protection and safety for your hot tub, above and beyond the standard
tie-down-straps that come with spa covers.
At 14' long, they are easily retrofitted to any spa cover and even work when used with a cover lifter. The unique locking latches make for complete
adjustability, removability and ease of use.
Click on pictures above for a larger view
Tie-down Extender
Click for larger image |
If the tie-down straps of your spa cover are too short, or the mounting location on your spa for the buckle is
inaccessible or damaged, this could solve your problem. 14" long, 1-1/2" wide nylon straps with the female end of the buckle permanently
attached. Simply attach the end of the strap up to 14" away from the original location with the include stainless steel hardware
for easy installation. |
Replacement Tie-down Buckles
Click for larger image |
This replacement set of spa cover tie-down buckles come complete with two locking buckles, one key, six stainless steel screws
and complete easy instructions. |
Floating Blanket Leash
Click for larger image |
If you use a cover lifter and a floating blanket this is something you wont know how you ever did without. The Floating Blanket
Leash attaches your floating blanket to your spa cover so that when you open your cover, and remove it with the cover lifter, the floating blanket
is automatically removed at the same time. No longer will you need to manually remove your floating blanket, and figure out where to put it when
you use your spa. Your floating blanket will also remain cleaner since it will be gently hanging, off the ground, over your insulating cover and on
top of the cover lifter. |
The Cover Saver
 |
Cover lifters work by lifting and supporting the spa cover by it's center hinge.
While a cover lifter makes removing the spa cover easier, few insulating covers are truly designed to
have their entire weight supported by the hinge. Most spa cover warranties even have an exclusion regarding
any damage caused by cover lifters. The Cover Saver removes all the stress from the hinge of the spa cover.
All spa covers eventually begin to absorb water, which increases their weight, and increases the stress
on the cover's hinge when supported by a cover lifter. Even a cover specifically designed to accommodate
a spa cover lift will eventually be damaged from this excess weight.
The Spa Cover Saver eliminates all stress from the covers hinge by fully supporting the weight of the cover on the lifter ! |
When the cover and lifter are open,
there is no stress on the hinge.
|
This is because the cover is being
supported by the Cover Saver's T-Brackets, not the cover's hinge.
|
With the spa cover resting on the T-Brackets and not hanging from a bar, the Cover Saver
is "saving your cover".
|
The T-Brackets are attached to your cover and its lift with strong UV-resistant nylon
webbing straps.
|
Click on any picture above for a larger view
|
